NCC CO2 laser cutting machine to cut 6 layers garment corte e gravação a...

Laser Cutter Safety Rules

0

[SAFETY TIPS AND CUTTING RULES]

1. Seek administrators’ approval for use.
2. Prepare your work piece to the size of 24” x 12” (600mm x 300mm).
3. Refer to the cutting manual for appropriate engraving and cutting Power and Speed settings for varied materials.
4. Beware of FLAMMABLE materials while using the machines.
   Certain materials are NOT ALLOWED in the laser cutter; including:
   • Foam core
   • Any PCV material
   • Reflective materials
5. Clean lenses with alcohol and swab before and after each use.
6. Before cutting make sure the air compressor and the air filter are on.
7. NEVER LEAVE THE LASER CUTTER when it is on.
8. Clean up! Users are responsible for clean up after themselves; failure to which may result in loss of FABLAB Privileges.

Tip #1 : The laser cutter will generally not cut anything greater than 0.25” (6mm), anything thicker will require several passes.

Tip #2 : To engrave glass, put a masking on top before engraving.

Tip #3 : Turn off the laser cutter after every 4 to 5 projects ( for the laser to recharge.)

Tip #4 : ALWAYS make sure the lines are hairline for vector cutting.